| Home | E-Submission | Sitemap | Contact Us |  
DOI: https://doi.org/10.4491/eer.2018.210
Verifying sub-micron (nano) bubbles generation and their fundamental characteristics
Sangbeom Kim1, Hyoungjun Kim2, Mooyoung Han3, and Tschungil Kim4
1Water, Sanitation and Hygiene Section, United Nations Children’s Fund, Vientiane, 0107, Lao P.D.R
2Irehenvit corp. Seoul, 08510, Republic of Korea
3Department of Civil and Environmental Engineering, Seoul National University, Seoul 08826, Republic of Korea
4Institute of Engineering Research, Seoul National University, Seoul 08826, Republic of Korea
Corresponding Author: Tschungil Kim ,Tel: +82-2-880-4321 , Fax: +82-2-877-7376, Email: amor77@gmail.com
Received: June 20, 2018;  Accepted: September 19, 2018.
Share :  
ABSTRACT
Although nanobubbles attract significant attention, their characteristics and applications have not been thoroughly defined. There are diverse opinions about the definition of nanobubbles and controversy regarding methods that verify their characteristics. This study defines nanobubbles as having a size less than 1 µm. The generation of these sub-micron (nano) bubbles may be verified by induced coalescence or light scattering. The size of a sub-micron (nano) bubbles may be measured by optical, and confocal laser scanning microscopy. Also, the size may be estimated by the relationship of bubble size with the dissolved oxygen concentration. However, further research is required to accurately define the average bubble size. The zeta potential of sub-micron (nano) bubbles decreases as pH increases, and this trend is consistent for micron bubbles. When the bubble size is reduced to about 700-900 nm, they become stationary in water and lose buoyancy. This characteristic means that measuring the concentration of sub-micron (nano) bubbles by volume may be possible by irradiating them with ultrasonic waves, causing them to merge into micron bubbles. As mass transfer is a function of surface area and rising velocity, this strongly indicates that the application of sub-micron (nano) bubbles may significantly increase mass transfer rates in advanced oxidation and aeration processes.
Keywords: Bubble size | Bubble volume concentration | Nano bubbles | Rising velocity | Sub-micron bubbles | Zeta potential
TOOLS
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
  E-Mail
Share:      
METRICS
0
Crossref
0
Scopus
66
View
4
Download
Editorial Office
464 Cheongpa-ro, #726, Jung-gu, Seoul 04510, Republic of Korea
TEL : +82-2-383-9697   FAX : +82-2-383-9654   E-mail : eer@kosenv.or.kr

Copyright© Korean Society of Environmental Engineers. All rights reserved.        Developed in M2community
About |  Browse Articles |  Current Issue |  For Authors and Reviewers